![]() ![]() ![]() Do email us if you have a preferred place to purchase in your country that is not in the list below. For speed and cost of delivery, we recommend purchasing devices in your country. The following are some places on the internet you can purchase RadBeacon USB devices. Our documentation will apply to any Beacon whereby the vendor provides you access to the software to reprogram, but our instructions specifically will be for RadBeacon USB devices. These are the Beacons we've used for years and formerly resold. We recommend RadBeacon USB from Radius Networks. Or, if you are using a new Beacon vendor, we recommend trying just one Beacon first to make sure it performs as expected before purchasing more. This is something you can ask the vendor. This is typically a given, but we have had at least one vendor (Estimote) in the early days whose hardware would occasionally power-cycle and everyone would check out. Second, make sure that the Beacon consistently powers and produces the signal. iBeacon, made popular by Apple, governs how the Beacons broadcast. There are two primary technical requirements you'll need to look out for when purchasing hardware Beacons.įirst, make sure they comply with the iBeacon specification. If you need instructions for how to program Beacon hardware, check out our article on reprogramming RadBeacon USBs. This page highlights some requirements, and also contains a few links you can use to purchase our preferred Beacon hardware. In order to re-enter normal operational model, simply remove and replace power to the device.To utilize automatic updates in Simple In/Out via Beacons, you'll need Bluetooth hardware to emit the Beacon signal. Reboot the beacon into Direct Firmware Update mode.Ĭontact Radius Networks support for information on the procedure for firmware update or replacement. Press the Action Menu button and select DFU. In order to re-enter configurable mode for a RadBeacon X2, remove the front cover and switch the beacon power switch to OFF and back to ON.Ī beacon set in configurable mode will be configurable for up to 30 minutes or until you lock the device again. In order to re-enter configurable mode for a RadBeacon Tag, remove the front cover and press the configuration push button switch near the coin cell battery. In order to re-enter configurable mode for a RadBeacon USB, remove and restore power to the device. The Lock feature is a security precaution to limit the possibility of third party manipulation of your beacons once they have been installed and configured. Submit a valid PIN to prevent connections from remote Bluetooth 4.0 devices to the beacon configuration service. Press the Action Menu button and select Lock. Label FCC ID User Label Radius Networks Inc RBT003 RadBeacon Locator Tent 2ABYU 2ABYURBT003 rbt003 Label Artwork and Location Model: RBT-003 Label: RadBeacon Locator Tent Model: RBT-003 FCC ID: 2ABYU-RBT003 IC ID: 12010A-RBT003 Radius Networks, Inc. Submit a valid PIN to reset the settings for your beacon to factory defaults. Reset the device to the original factory settings. Press the Action Menu button and select Reset. Submit a new and existing PIN to update the PIN for your beacon. Press the Action Menu button and select Update PIN. Validate the accuracy of your beacon settings by quickly verifying the ranging behavior of your device in proximity to your configured beacon. Press the Action Menu button and select Range. Update the measured power value with the results of your calibration activity and update your settings. Press the Action Menu button and select Calibrate.Ĭalibrate the measured power value of the beacon settings to ensure optimal proximity events and ranging. Submit a valid PIN to update the settings for this beacon. Press the Action Menu button and select Apply. Select any RadBeacon in the table to view it's detailed settings. Each beacon discovered is displayed with the following summary details Scan for nearby configurable RadBeacons by swiping down on the RadBeacons table. Once discovered, you can display each beacon's operating settings and make modifications to those settings. With the RadBeacon app you can scan for nearby configurable Radius Networks beacons. The RadBeacon app from Radius Networks requires an iOS iPhone, iPad or iPod touch running iOS 7.1 or higher and equipped with Bluetooth 4.0 capabilities. ![]() The RadBeacon™ app is the configuration utility for RadBeacon proximity beacons from Radius Networks that support Apple's iBeacon™ proximity services as well as other emerging proximity services. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |